classifieds
|
|
CART 1 - (American Flag Wrap) $2,500 Tag Cart 125cc touch and go Leopard ax9 CART 2 - (All Red) $2,000 Tag Cart 125cc CART 3 - (Black and Red) $1,800 Yamaha KT100 racing cart Contact Shane Hoover with any questions or inquiries Contact email: Shanehoover1@gmail.com Contact Phone: 717-682-2688 |
|
|
Bandit OH12 for sale - $2,000: Complete kart with GT Machine 206 engine, Mychron 4 , spare wheels and tires, gears. Race ready. With Gold Cup and CIK body work. Call or text Cam at 571-383-7092 |
|
|
Arrow AX-9 full turn key package - $2500
Included: •Arrow AX-9 Chassis •2006 frame •4 hours run time on full rebuild (by Paul Kennedy) •PRD Fireball 125cc 2 cycle engine, 28hp •Mychron 4 digital gauge •2 sets of wheels with tires from last season. Better set has only 4 heat cycles. •Kart Stand •External Starter •12 clutch sprockets, 2 engine sprockets (should have gearing for most road race and sprint tracks) •Lots of used tires (most not pictured) •Other spares including rear hubs, used axle, used steering shaft, bodywork, prd wiring/ignition parts, misc hardware Contact Michael Wu at mwu153@gmail.com |
|
|
$1300
From Alec Smyth: Hello friends, We spent the winter restoring Trevor's kart for the 2019 season, only to be offered a super deal on a K&K factory team kart that has only 4 races on it - so we are going to modernize to a 2018 model and our just restored 2016 K&K is up for sale. Our 2016 was just trued up on a table, powder coated, got the floor anodized, new decals, etc. There's literally no detail wanting, it's ready to go. We purchased this chassis from KDM Racing for our first season in 2017. It had been their reserve chassis and was virtually new. We drove all the way to Quebec in search of one of these, because in 2016 K&K had won every national level 4 cycle championship in Canada. Here are the major things I like about this chassis. |
1) It's fast! See the photo that shows the times from the final practice at Indy 2018. That was Trevor's first national race too. At the club level, in two years we've never finished a race lower than second place.
2) It's made by Righetti, so spares are available everywhere and are very reasonably priced. For example, a Righetti spindle is $70, whereas other Italian brands can be around $200. Spindles are the crumple zones of a kart, and if I were buying Birel or Praga spindles I would have spent more on those than I did on the entire chassis.
3) K&K consider anyone who drives one of their chassis to be a factory driver, and at national events invite you under their tent. They are completely open with setup and driving advice, which was invaluable to a new kart dad.
This is an Italian chassis made specifically for 4 strokes based on input from K&K. It is similar to Righetti's "Extreme" brand, and shares all components with it, but you will notice the cross member behind the seat is at 90 degrees instead of angled, and there are 2 axle bearings instead of 3. These tweaks make it more flexible and thus ideal for lower powered classes.
We'll be glad to offer setup info with the kart, and are rather hoping that it will be bought by someone local so are advertising it here first.
Selling for $1,300. If its new driver is a Junior, I have also several out-grown items that might be of interest, such as suits and pedal extenders.
Here's some onboard footage:
https://vimeo.com/279712485
Contact Alec Smyth at:
alecsmyth@gmail.com
703-906-5346
2) It's made by Righetti, so spares are available everywhere and are very reasonably priced. For example, a Righetti spindle is $70, whereas other Italian brands can be around $200. Spindles are the crumple zones of a kart, and if I were buying Birel or Praga spindles I would have spent more on those than I did on the entire chassis.
3) K&K consider anyone who drives one of their chassis to be a factory driver, and at national events invite you under their tent. They are completely open with setup and driving advice, which was invaluable to a new kart dad.
This is an Italian chassis made specifically for 4 strokes based on input from K&K. It is similar to Righetti's "Extreme" brand, and shares all components with it, but you will notice the cross member behind the seat is at 90 degrees instead of angled, and there are 2 axle bearings instead of 3. These tweaks make it more flexible and thus ideal for lower powered classes.
We'll be glad to offer setup info with the kart, and are rather hoping that it will be bought by someone local so are advertising it here first.
Selling for $1,300. If its new driver is a Junior, I have also several out-grown items that might be of interest, such as suits and pedal extenders.
Here's some onboard footage:
https://vimeo.com/279712485
Contact Alec Smyth at:
alecsmyth@gmail.com
703-906-5346
|
|
$1750
Ready to race HAASE CORSA 30mm shifter/TAG chassis, 125cc IAME Parilla Leopard MY07 engine. Chassis has been powered coated last winter and detailed. Body work has one race. It comes with front brakes but they need to be redone. Engine runs great. Contact Sebastian Fleischer at (443)610-0602 or sebguayan@icloud.com |